Connecting the Refrigerator

to a Water Source

Read all directions carefully before you begin.

IMPORTANT:

If operating the refrigerator before installing the water connection, turn ice maker to the OFF position to prevent operation without water.

All installations must be in accordance with local plumbing code requirements.

Use copper tubing and check for leaks.

Install copper tubing only in areas where temperatures will remain above freezing.

It may take up to 24 hours for your ice maker to begin producing ice.

Tools required:

Standard screwdriver

⁷⁄₁₆-inch and ¹⁄₂-inch open-end wrenches or two adjustable wrenches

¹⁄₄-inch nut driver

¹⁄₄-inch drill bit

Hand drill or electric drill (properly grounded)

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄-inch saddle-type shut-off valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆-inch saddle valve which reduces water flow and clogs more easily.

Cold Water Supply

The ice maker water valve contains a flow washer which is used as a water pressure regulator. The ice maker needs to be connected to a cold water line with water pressure between 30 and 120 psi. If a problem occurs, call your utility company.

Connecting to water line:

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Find a ¹⁄₂-inch to 1¹⁄₄-inch vertical COLD water pipe near the refrigerator.

NOTE: Horizontal pipe will work, but the following

precaution must be taken: Drill on the top side of the pipe, not the bottom. This will help keep water away from the drill. This also keeps normal sediment from collecting in the valve.

4.To determine the length of copper tubing you will need, measure from connection on lower left rear of refrigerator to water pipe. Add 7 feet (2.1 m) to allow for moving refrigerator for cleaning. Use ¹⁄₄-inch O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a grounded drill, drill a ¹⁄₄-inch hole in the cold water pipe you have selected.

1.Cold Water Pipe

2.Pipe Clamp

3.Copper Tubing

4.Compression Nut

5.Compression Sleeve

6.Shut Off Valve

7.Packing Nut

6.Fasten shut-off valve to cold water pipe with pipe clamp. Be sure outlet end is solidly in the ¹⁄₄-inch drilled hole in the water pipe and that washer is under the pipe clamp. Tighten packing nut. Tighten the pipe clamp screws carefully and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing, especially if soft (coiled) copper tubing is used. Now you are ready to connect the copper tubing.

7.Slip compression sleeve and compression nut on copper tubing as shown. Insert end of tubing into outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing into a container or sink, and turn ON main water supply and flush out tubing until water is clear. Turn OFF shut-off valve on the water pipe. Coil copper tubing.

8

Page 8
Image 8
Whirlpool SS25AQXHW00 manual Connecting the Refrigerator To a Water Source, Read all directions carefully before you begin

SS25AQXHW00 specifications

The Whirlpool SS25AQXHW00 is a top-performing side-by-side refrigerator designed to meet the needs of modern households. This appliance not only adds convenience but also enhances the kitchen's aesthetics with its sleek and contemporary design. One of the most significant features of this refrigerator is its ample storage capacity, which ensures that families have sufficient space for all their groceries and perishable items.

One standout characteristic of the SS25AQXHW00 is its Adaptive Defrost technology. This innovative feature optimizes the defrost cycle based on individual usage patterns, ensuring that the refrigerator runs efficiently while preventing ice buildup. As a result, users can enjoy a hassle-free experience without having to worry about manual defrosting.

Another notable feature is the Accu-Chill Temperature Management System. This advanced system uses sensors to monitor the internal temperature, quickly adjusting cooling settings to maintain the desired environment for food preservation. It ensures that items stored in the refrigerator and freezer sections remain fresh for longer periods, minimizing food waste.

The Whirlpool SS25AQXHW00 also integrates an advanced water filtration system that provides excellent quality water and ice. The refrigerator is equipped with a built-in ice maker and a water dispenser, giving you immediate access to fresh ice and filtered water. This is perfect for families who enjoy entertaining guests or simply want quick access to refreshments.

Energy efficiency is another prime characteristic of the SS25AQXHW00. With its Energy Star certification, this refrigerator is designed to reduce energy consumption, contributing to lower utility bills and a smaller carbon footprint. This feature makes it an ideal choice for eco-conscious consumers and families looking to save on energy costs.

Additionally, the unit boasts adjustable shelves and door bins, allowing users to customize the storage space to accommodate various sizes of food items. This flexibility ensures that every inch of space can be utilized efficiently.

In summary, the Whirlpool SS25AQXHW00 combines modern design with innovative technologies, making it a fantastic choice for any kitchen. Its features, including Adaptive Defrost, Accu-Chill Temperature Management, a built-in ice maker, and energy efficiency, create an exceptional user experience. This refrigerator is not only practical but also embraces the latest advancements in appliance technology, making it a valuable investment for your home.