Whirlpool SS25AQXHW00 manual Base Grille, Door Closing

Models: SS25AQXHW00

1 51
Download 51 pages 3.36 Kb
Page 9
Image 9

Connecting to refrigerator:

1.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help prevent damage to the tubing when the refrigerator is pushed back against the wall. Move to step 2.

2.Turn shut-off valve ON. Check For Leaks. Tighten any connections (including connections at the valve) or nuts that leak.

1.Tube Clamp

2.Copper tubing

3.Compression Nut

4.Valve Inlet

3.The ice maker is equipped with a built-in water strainer. If local water conditions require periodic cleaning or a well is your source of water supply, a second water strainer should be installed in the ¹⁄₄-inch water line. Obtain a water strainer from your nearest appliance dealer. Install at either tube connection.

4.Plug in refrigerator or reconnect power.

Base Grille

NOTE: Be sure to refasten the Tech Sheet behind the base grille after cleaning.

To replace the grille:

1.Open the doors.

2.Line up the grille support tabs with the metal clips.

3.Push the grille firmly to snap it into place.

Door Closing

Door Closing

Your refrigerator has 2 front adjustable rollers — one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using the instructions below:

1.Plug in refrigerator.

2.Move the refrigerator into its final position.

3.Remove the base grille (see “Base Grille” earlier in this section). The two leveling screws are part of the front roller assemblies which are at the base of the refrigerator on either side.

4.Use a screwdriver to adjust the leveling screws. Turn the leveling screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side. It may take several turns of the leveling screws to adjust the tilt of the refrigerator.

NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws and rollers. This makes it easier to adjust the screws.

To remove the base grille:

1.Open both refrigerator doors.

2.Place hands along the ends of the grille, with your thumbs along the top. Push in with your thumbs and pull up on the bottom.

5.Open both doors again and check to make sure that they close as easily as you like. If not, tilt the refrigerator slightly more to the rear by turning both leveling screws to the right. It may take several more turns, and you should turn both leveling screws the same amount.

6.Replace the base grille.

9

Page 9
Image 9
Whirlpool SS25AQXHW00 manual Base Grille, Door Closing

SS25AQXHW00 specifications

The Whirlpool SS25AQXHW00 is a top-performing side-by-side refrigerator designed to meet the needs of modern households. This appliance not only adds convenience but also enhances the kitchen's aesthetics with its sleek and contemporary design. One of the most significant features of this refrigerator is its ample storage capacity, which ensures that families have sufficient space for all their groceries and perishable items.

One standout characteristic of the SS25AQXHW00 is its Adaptive Defrost technology. This innovative feature optimizes the defrost cycle based on individual usage patterns, ensuring that the refrigerator runs efficiently while preventing ice buildup. As a result, users can enjoy a hassle-free experience without having to worry about manual defrosting.

Another notable feature is the Accu-Chill Temperature Management System. This advanced system uses sensors to monitor the internal temperature, quickly adjusting cooling settings to maintain the desired environment for food preservation. It ensures that items stored in the refrigerator and freezer sections remain fresh for longer periods, minimizing food waste.

The Whirlpool SS25AQXHW00 also integrates an advanced water filtration system that provides excellent quality water and ice. The refrigerator is equipped with a built-in ice maker and a water dispenser, giving you immediate access to fresh ice and filtered water. This is perfect for families who enjoy entertaining guests or simply want quick access to refreshments.

Energy efficiency is another prime characteristic of the SS25AQXHW00. With its Energy Star certification, this refrigerator is designed to reduce energy consumption, contributing to lower utility bills and a smaller carbon footprint. This feature makes it an ideal choice for eco-conscious consumers and families looking to save on energy costs.

Additionally, the unit boasts adjustable shelves and door bins, allowing users to customize the storage space to accommodate various sizes of food items. This flexibility ensures that every inch of space can be utilized efficiently.

In summary, the Whirlpool SS25AQXHW00 combines modern design with innovative technologies, making it a fantastic choice for any kitchen. Its features, including Adaptive Defrost, Accu-Chill Temperature Management, a built-in ice maker, and energy efficiency, create an exceptional user experience. This refrigerator is not only practical but also embraces the latest advancements in appliance technology, making it a valuable investment for your home.