Air Dry Control Lock
Select this option to dry dishes without heat and save energy. The dishes take longer to dry and some spotting can occur.
For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.
NOTE: The dishwasher automatically heats the air in the dishwasher during the “dry” portion of the cycle unless you select Air Dry Control Lock.
Delay Hours
Use Delay Hours to run your dishwasher at a later time or during
To delay the start
1.Close the door.
2.Press DELAY HOURS 1 time for a
Sanitized
If you select the SANI RINSE™ option, Sanitized glows when the SANI RINSE™ cycle is finished. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of the cycle. This can happen if the cycle is interrupted. The light goes off when you open the door.
Locked
Use Locked to prevent unintended use of the dishwasher. You can also use the locked feature to prevent unintended cycle or option changes during a cycle.
NOTE: When Locked is lit, all buttons are disabled.
To lock the controls
Press and hold
for 5 seconds. Locked glows. If you press any pad while your dishwasher is locked, the light flashes 3 times.
To unlock the controls
Press and hold AIR DRY CONTROL LOCK for 5 seconds until the light turns off.
NOTE: The dishwasher door can be opened while the controls are locked.
3.Select a wash cycle and option.
The number glows above Delay Hours. The dishwasher starts the cycle in the selected number of hours. If you do not press a cycle within 30 seconds, the Delay Hours indicator turns off.
NOTES:
■To cancel the delay and cycle, press CANCEL/DRAIN.
■To cancel the delay and start the cycle, press DELAY HOURS until “6” glows. Then press DELAY HOURS one more time. The delayed cycle starts.
Cycle Status Indicators
Follow the progress of your dishwasher with the Cycle Status Indicators.
Drying System
During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat dries your dishes.
IMPORTANT: The vapor is hot. Do not touch the vent during drying.
Overfill Protection Float
The overfill protection float (in the front right corner of the dishwasher tub) keeps the dishwasher from overfilling. It must be in place for the dishwasher to operate.
Sensing
Your dishwasher senses the soil level on the dishes. Soil level determines the length of some cycles, the amount of heat added to the wash or rinse, and the cycle needed for the load. Sensing glows during the soil sensing parts of the cycle. Wash action continues while sensing occurs.
Heat Water
Heat Water glows whenever water is heated during a cycle. Wash or rinse action continues as the water heats.
Clean
Clean glows when a cycle is finished. The light turns off when you open the door or press CANCEL/DRAIN.
Check under the float for objects that may keep the protector from moving up or down.
13
