Targus e340, I640 manual Display, Alphanumeric, Ringing and Tones, Audio Features, Line Indicators

SpectraLink Corporation	Setup and Administration—NetLink e340/i640 Wireless Telephone
	Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

3.2The Display

Alphanumeric

Display information provided by the supported Mitel Networks VoIP solution when the Wireless Telephone is off-hook will be passed directly to the Wireless Telephone display. The Wireless Telephone will display up to 18 characters of each line. Certain characters may be used by the supported Mitel IP PBX solution that are not implemented in the Wireless Telephone, such as definable or special characters.

Press the FCN key while off hook to scroll through features and emulated keys. Press the LINE key while off hook to scroll through the line/memory keys.

Ringing and Tones

The ringing types are programmed by the Wireless Telephone user into the Wireless Telephone and are not accessible or changeable by the supported Mitel Networks VoIP solution. Whenever possible the audible and vibrating ringer on the Wireless Telephone will follow the MiNET cadence commands provided by the supported Mitel Networks VoIP solution.

Audio Features

Speakerphone features such as paging, hands-free mode and voice announce are not available on the Wireless Telephone. The telephony switch should not be programmed to support such features on the Wireless Telephone.

Line Indicators

The line indicators on the Wireless Telephone will convert to a solid or flashing number to mimic the icons next to Line keys on the Mitel Networks 5220. The text that appears next to the line keys on the 5220 IP Phone is accessed on the Wireless Telephone by pressing the LINE key.

PN: 72-1084-02-D.doc Page 11