Targus e340, I640 DNS

SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone

Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

DNS

Domain Name System (DNS), an industry-standard protocol, locates computers on an IP-

based network. IP networks rely on number-based addresses to move information on the

network. However, users are better at remembering friendly names than number-based

addresses, so, it is necessary to translate user-friendly names into addresses that the

network can recognize. The Wireless Telephone will use DNS to automatically translate

names into IP Addresses for these components: TFTP Server and the NetLink SVP

Server.

PN: 72-1084-02-D.doc Page 28

Contents

Main NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP with 5220 IP Phone emulation Setup and Administration NOTICE Trademark Information Table of Contents 1. About This Document 1.1 Contacting SpectraLink 1.2 Icons and Conventions Note these instructions carefully. 2. NetLink e340/i640 Wireless Telephone Overview IP multicast addresses are used by the NetLink i640 Wireless Telephone. 2.1 Quick Start Guide 2.2 System Diagram 2.3 System Components Page 3. The NetLink e340/i640 Wireless Telephone 3.1 Specifications 3.2 The Display 3.3 Startup Sequence 3.4 Wireless Telephone Modes 3.5 Wireless Telephone Displays 4. NetLink e340/i640 Wireless Telephone Configuration If an admin password has been set, the display will require its entry before 4.1 The Admin Menu Opening the Admin Menu Entering and editing Admin Menu options Alphanumeric String Entry IP Address ESSID License Management Restore Defaults Site Survey Mode Regulatory Domain Note that WEP may be set to optional at the AP if there are wireless Clear PIN Number 5220 Emulation OAI On/Off Admin PW If you exit with no entry, the password is erased and the display will not 4.2 User-defined Preferences Page 5. License Management 5.1 Requirements 5.2 Configuration Process For future software upgrades, simply update the files that are stored on the 6. Mitel Networks VoIP Integration Factors Voice Messaging Access CODECs DHCP TFTP DNS 7. Feature Programming 7.1 Feature Assignment If an Open Application Interface (OAI) is operational, a function key 7.2 Feature Access The Wireless Telephone emulates the operation of the 5220 IP Phone Line Appearances Menu Display Feature List Superkey Hot Desking Resiliency Paging 8. Testing a Wireless Telephone 9. Certifying the NetLink e340/i640 Wireless Telephones The Wireless Telephone performing the site survey must be configured 9.1 Site Certification 9.2 Site Survey Mode Detect dBm coverage Detect Overlap or Conflicts Confirm Supported Data Rates 9.3 Solving Coverage Issues 10. Software Maintenance 10.1 Upgrading Wireless Telephones Normal Download Messages Download Failure or Recovery Messages 11. Troubleshooting Wireless Telephone Problems 11.1 Access Point Problems 11.2 Configuration Problems 11.3 Wireless Telephone Status Messages Page Page Page Page Page Index PN: 72-1084-02-D.doc Page 47