Manuals / Brands / Cell Phone / Cell Phone / Targus / Cell Phone / Cell Phone

Targus e340, I640 If you exit with no entry, the password is erased and the display will not

1 47

Download 47 pages, 1.64 Mb

SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone

Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

If you have an OAI Gateway installed in your system, OAI may be optionally enabled in

each Wireless Telephone. You may select whether the Wireless Telephone should

attempt to connect to the SpectraLink OAI Gateway by choosing either the Enable or

Disable options in this menu.

If OAI is enabled, and an OAI IP Address is available to the telephone (either via DHCP

or Static IP configuration), the telephone will communicate with the OAI Server at power

on, and periodically while it is powered on. If you don’t have a SpectraLink OAI

Gateway installed at your site, you should disable the OAI feature to preserve network

bandwidth and battery life.

Admin PW

The Admin PW (password) controls access to the administration functions in the Admin

Menu. The password must be set in each Wireless Telephone for which controlled access

is desired. Wireless Telephones are shipped without any Admin Menu password.

 If you exit with no entry, the password is erased and the display will not

require it before displaying the Admin Menu.

PN: 72-1084-02-D.doc Page 22

Contents

Main NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP with 5220 IP Phone emulation Setup and Administration NOTICE Trademark Information Table of Contents 1. About This Document 1.1 Contacting SpectraLink 1.2 Icons and Conventions Note these instructions carefully. 2. NetLink e340/i640 Wireless Telephone Overview IP multicast addresses are used by the NetLink i640 Wireless Telephone. 2.1 Quick Start Guide 2.2 System Diagram 2.3 System Components Page 3. The NetLink e340/i640 Wireless Telephone 3.1 Specifications 3.2 The Display 3.3 Startup Sequence 3.4 Wireless Telephone Modes 3.5 Wireless Telephone Displays 4. NetLink e340/i640 Wireless Telephone Configuration If an admin password has been set, the display will require its entry before 4.1 The Admin Menu Opening the Admin Menu Entering and editing Admin Menu options Alphanumeric String Entry IP Address ESSID License Management Restore Defaults Site Survey Mode Regulatory Domain Note that WEP may be set to optional at the AP if there are wireless Clear PIN Number 5220 Emulation OAI On/Off Admin PW If you exit with no entry, the password is erased and the display will not 4.2 User-defined Preferences Page 5. License Management 5.1 Requirements 5.2 Configuration Process For future software upgrades, simply update the files that are stored on the 6. Mitel Networks VoIP Integration Factors Voice Messaging Access CODECs DHCP TFTP DNS 7. Feature Programming 7.1 Feature Assignment If an Open Application Interface (OAI) is operational, a function key 7.2 Feature Access The Wireless Telephone emulates the operation of the 5220 IP Phone Line Appearances Menu Display Feature List Superkey Hot Desking Resiliency Paging 8. Testing a Wireless Telephone 9. Certifying the NetLink e340/i640 Wireless Telephones The Wireless Telephone performing the site survey must be configured 9.1 Site Certification 9.2 Site Survey Mode Detect dBm coverage Detect Overlap or Conflicts Confirm Supported Data Rates 9.3 Solving Coverage Issues 10. Software Maintenance 10.1 Upgrading Wireless Telephones Normal Download Messages Download Failure or Recovery Messages 11. Troubleshooting Wireless Telephone Problems 11.1 Access Point Problems 11.2 Configuration Problems 11.3 Wireless Telephone Status Messages Page Page Page Page Page Index PN: 72-1084-02-D.doc Page 47