Targus I640, e340 manual PN 72-1084-02-D.doc

SpectraLink Corporation	Setup and Administration—NetLink e340/i640 Wireless Telephone
	Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

5.Using the Admin Menu on the Wireless Telephone, ensure the License Management menu option is set to 014. This ensures the handset will check for the proper MiNET files each time it powers on. See the NetLink e340/i640 Wireless Telephone Configuration section for detailed configuration instructions.

6.Power cycle the Wireless Telephone.

7.The MiNET code will now download to the handset. The status bar will increment fully across the display for each function that is being performed in the download process. Upon completion of the update process, the handset will re-boot with the new firmware.

8.If the Wireless Telephone is statically configured, you may now enter the SVP IP address and RTC address as detailed in the NetLink e340/i640 Wireless Telephone Configuration section above.

9.Register the Wireless Telephone with the supported Mitel Networks VoIP solution as if it were a Mitel Networks 5220 IP Phone and properly label the handset with the appropriate extension.

For future software upgrades, simply update the files that are stored on the TFTP Server. Each time the Wireless Telephone is powered on, it will check with the TFTP Server to ensure it has the proper software version.

PN: 72-1084-02-D.doc Page 26