Targus e340, I640 - page 24

SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone

Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

Noise Mode Select Noise Mode to adjust the Wireless Telephone for background

noise. Select Normal: for most office environments; High: for moderate

background noise; or Severe: for extremely noisy conditions. Use of the

non-Normal modes is not recommended unless you are in a loud

environment or you may find it difficult to be heard on your Wireless

Telephone.

Alias IP Addr This option displays the IP address currently used for this Wireless

Telephone by the SVP Server for communications with the call server.

Current IP

Addr

This option displays the IP address currently assigned to the Wireless

Telephone. The IP address is not set here; it is merely displayed and may

not be changed.

Extension This option allows you to enter the user extension for this Wireless

Telephone. This number is for display purposes only; entering it does

not assign the extension in the host telephone system.

Mitel options This option displays the ports being utilized for receiving data at the

Wireless Telephone.

Push-to-talk This option displays the menu for the two way radio feature in the

NetLink i640 Wireless Telephone. The Channel option allows you to

select a channel 1-8 to send and receive radio messages. The

Enable/Disable option allows you to enable or disable the radio feature.

See the NetLink i640 Wireless Telephone end-user document for more

information about push-to-talk.

(Additional options may be present. Contact your system administrator for information.)

PN: 72-1084-02-D.doc Page 24

Contents

Main NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP with 5220 IP Phone emulation Setup and Administration NOTICE Trademark Information Table of Contents 1. About This Document 1.1 Contacting SpectraLink 1.2 Icons and Conventions Note these instructions carefully. 2. NetLink e340/i640 Wireless Telephone Overview IP multicast addresses are used by the NetLink i640 Wireless Telephone. 2.1 Quick Start Guide 2.2 System Diagram 2.3 System Components Page 3. The NetLink e340/i640 Wireless Telephone 3.1 Specifications 3.2 The Display 3.3 Startup Sequence 3.4 Wireless Telephone Modes 3.5 Wireless Telephone Displays 4. NetLink e340/i640 Wireless Telephone Configuration If an admin password has been set, the display will require its entry before 4.1 The Admin Menu Opening the Admin Menu Entering and editing Admin Menu options Alphanumeric String Entry IP Address ESSID License Management Restore Defaults Site Survey Mode Regulatory Domain Note that WEP may be set to optional at the AP if there are wireless Clear PIN Number 5220 Emulation OAI On/Off Admin PW If you exit with no entry, the password is erased and the display will not 4.2 User-defined Preferences Page 5. License Management 5.1 Requirements 5.2 Configuration Process For future software upgrades, simply update the files that are stored on the 6. Mitel Networks VoIP Integration Factors Voice Messaging Access CODECs DHCP TFTP DNS 7. Feature Programming 7.1 Feature Assignment If an Open Application Interface (OAI) is operational, a function key 7.2 Feature Access The Wireless Telephone emulates the operation of the 5220 IP Phone Line Appearances Menu Display Feature List Superkey Hot Desking Resiliency Paging 8. Testing a Wireless Telephone 9. Certifying the NetLink e340/i640 Wireless Telephones The Wireless Telephone performing the site survey must be configured 9.1 Site Certification 9.2 Site Survey Mode Detect dBm coverage Detect Overlap or Conflicts Confirm Supported Data Rates 9.3 Solving Coverage Issues 10. Software Maintenance 10.1 Upgrading Wireless Telephones Normal Download Messages Download Failure or Recovery Messages 11. Troubleshooting Wireless Telephone Problems 11.1 Access Point Problems 11.2 Configuration Problems 11.3 Wireless Telephone Status Messages Page Page Page Page Page Index PN: 72-1084-02-D.doc Page 47