Targus e340, I640 Resiliency , Paging

SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone

Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

Resiliency

If the primary PBX fails and a secondary PBX is configured, any Wireless Telephone

that is configured to be resilient and powered on at the time of failure will switch to the

backup PBX. During the switchover the Wireless Telephone tries to register with each of

the resiliency IP addresses provided by the primary PBX at power on. These are stored in

static memory. If the Wireless Telephone is in a call during the failure of the primary

PBX, it will attempt to register with a backup PBX after the call is completed. Note that

the End Call button must be pressed at the end of a call to ensure correct functioning of

this feature.

Paging

The Wireless Telephone does not incorporate speakerphone capabilities and therefore

receiving a page is not supported. The user may send a page if this feature has been

programmed.

PN: 72-1084-02-D.doc Page 33

Contents

Main NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP with 5220 IP Phone emulation Setup and Administration NOTICE Trademark Information Table of Contents 1. About This Document 1.1 Contacting SpectraLink 1.2 Icons and Conventions Note these instructions carefully. 2. NetLink e340/i640 Wireless Telephone Overview IP multicast addresses are used by the NetLink i640 Wireless Telephone. 2.1 Quick Start Guide 2.2 System Diagram 2.3 System Components Page 3. The NetLink e340/i640 Wireless Telephone 3.1 Specifications 3.2 The Display 3.3 Startup Sequence 3.4 Wireless Telephone Modes 3.5 Wireless Telephone Displays 4. NetLink e340/i640 Wireless Telephone Configuration If an admin password has been set, the display will require its entry before 4.1 The Admin Menu Opening the Admin Menu Entering and editing Admin Menu options Alphanumeric String Entry IP Address ESSID License Management Restore Defaults Site Survey Mode Regulatory Domain Note that WEP may be set to optional at the AP if there are wireless Clear PIN Number 5220 Emulation OAI On/Off Admin PW If you exit with no entry, the password is erased and the display will not 4.2 User-defined Preferences Page 5. License Management 5.1 Requirements 5.2 Configuration Process For future software upgrades, simply update the files that are stored on the 6. Mitel Networks VoIP Integration Factors Voice Messaging Access CODECs DHCP TFTP DNS 7. Feature Programming 7.1 Feature Assignment If an Open Application Interface (OAI) is operational, a function key 7.2 Feature Access The Wireless Telephone emulates the operation of the 5220 IP Phone Line Appearances Menu Display Feature List Superkey Hot Desking Resiliency Paging 8. Testing a Wireless Telephone 9. Certifying the NetLink e340/i640 Wireless Telephones The Wireless Telephone performing the site survey must be configured 9.1 Site Certification 9.2 Site Survey Mode Detect dBm coverage Detect Overlap or Conflicts Confirm Supported Data Rates 9.3 Solving Coverage Issues 10. Software Maintenance 10.1 Upgrading Wireless Telephones Normal Download Messages Download Failure or Recovery Messages 11. Troubleshooting Wireless Telephone Problems 11.1 Access Point Problems 11.2 Configuration Problems 11.3 Wireless Telephone Status Messages Page Page Page Page Page Index PN: 72-1084-02-D.doc Page 47