Lexmark 3455 ActivateYes Enable Bootp Yes or No, Enable Dhcp Yes or No, Enable Rarp Yes or No

7.2.1Selecting the MarkNet Internal Print Server TCP/IP Protocol Settings

From the printer operator panel, do the following:

1.Press Menu> until the NETWORK MENU displays. Press Select.

2.Press Menu> until the NETWORK OPTION 1 displays. Press Select. (This example assumes the MarkNet internal print server is installed in option connector 1.)

3.Press Menu> until you see NETWORK 1 SETUP. Press Select.

4.Press Menu> until you see TCP/IP. Press Select.

Here you find the following settings:

ActivateYes

Enable BOOTP Yes or No

(Yes, if you use a BOOTP server.)

(No, if you set the IP address another way.)

Enable DHCP Yes or No

(Yes, if you use a DHCP server.)

(No, if you set the IP address another way.)

Enable RARP Yes or No

(Yes, if you use a RARP server.)

(No, if you set the IP address another way.)

Set IP Address	157.184.67.102
(Address available from your network administrator)
Set IP Netmask	255.255.255.0
(Appropriate netmask for your network)
Set IP Gateway	157.184.67.1 (IP address of the IP gateway)
Set Hostname	Name (Necessary when using DHCP server.)

85