Lexmark 3455 manual Printer Messages and Problems, Message Problem Reference

9 Printer Messages and Problems

Review these problems and solutions for possible answers to your questions. Use the table below if you are searching for information on a printer message.

Message	Problem Reference
36 Resolution Reduced	2
38I Memory Full	5
Bad Memory System	11
Memory Full	5
Menus Disabled	4
Not enough memory for IPDS	14
Recycle PWR to activate value	15
Resources Lost	16
Two IPDS Sources Recycle Power	8

1.Problem:

The print queue stops with a fatal error, which requires operator intervention or the printer stays Busy and displays IPDS even when no IPDS jobs are printing.

Solution:

The host still has control of the printer. You need to adjust the Adapter for SCS timeout, the end-of-job timeout on your network adapter, the printer IPDS Timeout value, the host port value, or the appropriate timer/timeout value on your IPDS host. You may have to adjust a combination of these to solve the problem.

Adapter for SCS

See page 124 for a description of how to change the Coax Timeout value for the Adapter for SCS.

See page 129 for a description of how to change the Twinax Timeout value for the Adapter for SCS.

133