Lexmark 3455 manual Changing the Coax Timeout Value For Reference Only

8.4Changing the Coax Timeout Value (For Reference Only)

If necessary you can change the Coax Timeout value by following these steps:

1.Press Menu> until NETWORK MENU displays. Press Select.

2.Press Menu> until NETWORK OPTION 1, NETWORK OPTION 2 or NETWORK OPTION 3 displays. The number corresponds to the number of the option connector the Adapter for SCS occupies. Press Select.

3.Press Menu> until you see SCS MENU 1, SCS MENU 2 or SCS MENU 3. Press Select.

4.Press Menu> until you see SCS OPTIONS. Press Select.

5.Press Menu> until you see MISC. SETTINGS. Press Select.

6.Press Menu> until you see Coax Timeout. Press Select. Enter a value from 0 to 255. Press Select. The default is 0 seconds (disabled). You can specify how long the adapter will wait before closing the connection to the host.

124