Lexmark 3455 manual Seconds Minutes

15seconds

30seconds

60seconds

90seconds

2minutes

3minutes

5minutes

10minutes

Note:

N N

N

IPDS emulation timeout value. These values are only used by the printer IPDS emulation when the host sends IPDS jobs on port 9600 to a MarkNet internal print server. If the host does not send another IPDS job or send additional IPDS resource data to the printer within the timeout value specified, the printer IPDS emulation will time out, place all IPDS resources in temporary storage (see Storage of IPDS Resources below), and allow the printer to print jobs from other printer ports.

Host Timer/Timeout Values and Actions: While the printer is printing jobs from other printer ports, the host is still connected to the printer. The host timer/timeout value should be disabled or set to a large value to prevent the host from disconnecting and deleting the resources downloaded to the printer.

Up to four different LAN sessions may be active on port 9600. Requests for additional sessions will be ignored until the host disconnects from one of the established sessions.

The IPDS Timeout values are not active when the printer is connected to a host through an Adapter for SCS card. The IPDS timeout is controlled by the Coax or Twinax timeout value on the Adapter for SCS card.

The IPDS Timeout value defaults to Host Controlled when the printer is connected to a host through a MarkNet Pro external print server or MarkNet XLe print server. The host port value must be 9100 or 9102 to communicate with these print servers.

See Storage of IPDS Resources on next page for additional information.

41