Lexmark 3455 manual Ipds Manual Paper

4.5.4 IPDS Manual Paper

This option selects the default formatting paper size for the IPDS Manual media source (most often it is the IPDS Number 99 (63H)). This option setting applies to the Input Tray Mappings set to "Manual Paper".

You can do one of the following:

NUse the printer setting “Manual Pap Size”.

Select a different paper size for IPDS.

Selecting a specific size under the IPDS Menu will change the media size selected for the Postscript and PCL emulations, too. It is recommended that the IPDS value remain at the default of use Prtr Setting and the specific media size be selected under PAPER SIZE from the printer's PAPER MENU.

Prtr (printer) Setting*	Use the paper size from the “Manual Pap Size” printer
	default setting.
Letter	Letter paper size (8.5” x 11.0”)
Legal	Legal paper size (8.5” x 14.0”)
B5 (JIS)	B5 (JIS) paper size (182mm x 257mm)
A4	A4 paper size (210mm x 297mm)
Executive	Executive paper size (7.25” x 10.5”)
A5	A5 paper size (148mm x 210mm)
Universal	This setting allows the use of non-standard paper sizes.
	The media size returned to the host is specified with IPDS
	menu option Universal Size. Refer to section 4.5.7
	Universal Size on page 52 for more information. The
	default media size returned to the host is 215.9 x 355.6 mm
	(8.5 x 14.0 in.). If printing occurs after the length of the
	physical paper, the message 34 Short Paper is displayed
	in the operator panel.

Note: Universal paper support is only available on IPDS code level 9241 and above.

49