Lexmark 3455 manual Entering Comments in the Job, Syntax summary and hints

TrayMapping 1=Tray 1,2;

The example assigns the IPDS logical paper source number 2 with Tray 1.

6.3.3.4 Entering Comments in the Job

Comments may be entered in the job text. The beginning of a comment is marked with the start characters (/*) and terminated with the end characters (*/). See the sample comment below.

IpdsEmulation=4028; /* Sample comment */

6.3.3.5 Syntax summary and hints

A semicolon must end all option assignments.

When two values are required, they must be separated by commas.

Both lower and upper case letters can be used for options and values. Thus, the case does not have to match the operator panel.

Space characters are ignored and are optional.

Line feed controls are ignored. These should be used to prevent the text from printing off the edge of the page.

Always use an EBCDIC code page. Special code pages such as APL and

NOCR should not be used.

Comments are allowed. They have to be bracketed by the start characters /* and the end characters */.

79