Lexmark 3455 manual Configuring a MarkNet Pro External Print Server, Printing a MarkNet Pro Setup

7.3Configuring a MarkNet Pro External Print Server

To enable IPDS printing with the MarkNet Pro several settings must be changed. Changes to MarkNet Pro settings can be made using the appropriate network printer utilities. For more information on how to change these settings, refer to your Lexmark MarkNet Pro network adapter manual which came with your print server.

NNetwork Adapter User's Guide or

Network Adapter Hardware Setup

7.3.1 Printing a MarkNet Pro Setup Page

The MarkNet Pro Microcode Level must be: 2.9.15 (or greater)

To see the code level, you need to print the setup page. To print the MarkNet Pro setup page, press and release Menu and Test simultaneously. Under the Network Card heading on the Setup Page, look for Firmware Revision.

For more information, see Lexmark’s Network Printer Utility Guide.

If you need to update your MarkNet code level, contact the Lexmark Technical Support Center. MarkNet Pro firmware updates are also available from the Lexmark web site at http://www.lexmark.com.

7.3.2 Setting the MarkNet Pro TCP/IP Protocol Settings

The following TCP/IP protocol settings must be set in order for the host to send jobs to the printer through the MarkNet Pro. Contact your network administrator if you need help with these settings.

ActivateYes

Set IP Address 157.184.67.102

(Address available from your network administrator)

Set IP Netmask 255.255.255.0

(Appropriate netmask for your network)

87