Lexmark 3455 manual Setting the MarkNet XLe TCP/IP Protocol Settings, Activate

7.4.2 Setting the MarkNet XLe TCP/IP Protocol Settings

The following TCP/IP protocol settings must be set in order for the host to send jobs to the printer through the MarkNet XLe. Contact your network administrator if you need help with these settings.

Activate	Yes
Set IP Address	157.184.67.102
(Address available from your network administrator)
Set IP Netmask	255.255.255.0
(Appropriate netmask for your network)
Set IP Gateway	157.184.67.1 (IP address of the IP gateway)

7.4.3 Setting the MarkNet XLe Job Timeout

The recommended setting for the MarkNet XLe Job Timeout is 0 (disabled). This allows the host system "release timer" value to control when print jobs from another protocol, interface, server, or host can be started.

You may set the MarkNet XLe Job Timeout value to a value greater than the host "release timer" value. Errors are very likely to occur when the printer requires user intervention and the intervention is not cleared before the timeout occurs.

Setting the MarkNet XLe Job Timeout smaller than the host "release timer" value will result in communication errors after the job has printed.

90