Lexmark 3455 manual Activating Saved Option Changes, LAN Attachment, Coax/Twinax Attachment

3.2.5 Activating Saved Option Changes

You may need to power the printer OFF and ON to activate an option change. See the section below, which corresponds to your "attachment" method.

LAN Attachment

Most changes to IPDS MENU settings are active on the very next IPDS print job. This is true when you are LAN attached using a MarkNet internal print server or a MarkNet Pro external print server, or MarkNet XLe adapter. When the IPDS Timeout option is set to a value other than Host Controlled, you will have to power the printer OFF and ON to activate some menu setting changes. See note below.

Coax/Twinax Attachment

If you are attached to your host using a coax or twinax connection, most settings do not become active until the printer is powered OFF and ON. You should power the printer OFF and ON, if you want the settings to be used for your next print job.

Note: If you are LAN attached with the IPDS Timeout option set to a value other than Host Controlled or if you are using a coax or twinax attachment, the warning message below is displayed if changes do not take effect immediately.

26