Lexmark 3455 manual Example

Example 2

If an IPDS number is mapped (used) twice, the lowest tray mapping number is activated (if available). For example if Tray Mapping 6 and 7 both map to IPDS 64 as shown below, the printer will select media from the Env Feeder.

Tray Mapping 6	IPDS 64 Env Feeder
Tray Mapping 7	IPDS 64 Manual Env

In other words, the printer attempts to map to (select media from) the Env Feeder first and if it is not installed, the printer defaults to Manual Env.

Example 3

To link multiple input trays as one big input tray, you need to make changes under the printer's PAPER MENU. You need to set the PAPER SIZE and PAPER TYPE for each of the trays you want to link to the same value.

For example, the host expects colored paper in Tray 1 and you want to link Tray 2 and Tray 3, which have plain paper. Do the following:

Leave the MAP INPUT TRAYS at their defaults:

Tray Mapping 1	=	IPDS 0 mapped to Tray 1
Tray Mapping 2	=	IPDS 1 mapped to Tray 2

Insert letter-size colored paper in Tray 1. Insert letter-size plain paper in Trays 2 and 3.

The paper size is detected by the printer:

Tray 1 Size	=	Letter
Tray 2 Size	=	Letter
Tray 3 Size	=	Letter

55