Lexmark 3455 manual Twinax Interface Settings, SCS Device Address Setting, SCS Dev. Addr

8.8 Twinax Interface Settings

Only three setting options have to be considered to set up the Adapter for SCS for IPDS operation:

SCS Device Address

IPDS Device Address

IPDS Buffer Sizes

Note: Be certain to set the correct twinax address for both the SCS address and the IPDS address before physically connecting your printer to the twinax wiring system. If you were to incorrectly enter the same address used by another device, you would disable that device. If you do not know your printer’s correct address, see your network administrator.

8.9 SCS Device Address Setting

The SCS Device Address is used to select the twinax device address for the SCS emulation or to disable the SCS emulation if you don’t want to use it. From the printer operator panel, do the following:

1.Press Menu> until NETWORK MENU displays. Press Select.

2.Press Menu> to display NETWORK OPTION 1. Press Select. (This example assumes the Adapter for SCS is installed in option connector 1.)

3.Press Menu> to display SCS MENU 1. Press Select.

4.Press Menu> to display SCS OPTIONS. Press Select. Press Menu> until you find the following setting:

SCS Dev. Addr. 0

(Address can be “0” – “6” or “Disable”)

Note: If the IPDS emulation and the SCS emulation are given the same address, the SCS emulation is used and the IPDS emulation is ignored. The word DUPLICATE is displayed in the operator panel.

127