Lexmark 3455 manual Other Env Size

4.5.8 Other Env Size

A printer envelope size of Other Envelope may be selected in the printer menu or Other Envelope may be selected in the IPDS PAPER HANDLING menu when a non-standard size envelope is loaded into a non-size sensing tray or feeder. This option allows you to specify the envelope size returned to the host when Other Envelope is selected in the printer menu as the envelope size. Refer to section 4.5.3 IPDS Envelope Paper on page 47 for information on how to load envelopes in different printer models. The envelope size is specified in 300 dots per inch. See section 4.5.7 Universal Size on page 52 for a conversion example.

Important: The default envelope size value returned to the host is 215.9 x 355.6

mm(8.5 x 14.0 in.). A 34 Short Paper error will be displayed if printing occurs past the length of the physical envelope. You should specify the actual envelope size to avoid this error.

Note:		This option is only available on IPDS code level 9241 or above.
	Menu Option	Value Range	Function
	Envelope	4200*, 1500 to 4200	Specifies Other Envelope length. See note below.
	Length
	Envelope	2550*, 825 to 2550	Specifies Other Envelope width. See note below.
	Width
Note:		The printer trays and feeders are limited to feeding of specific
		envelope sizes. The IPDS envelope length and width selectable range
		is from the smallest to largest size envelopes which can be fed
		through the printer. Refer to your printer documentation when
		loading a non-standard envelope size to determine if that envelope
		size can be fed from that tray or feeder.

53