Lexmark 3455 manual Devd

3.Using WRKAFP2, specify the printer’s TCP/IP configuration information. This data area, which must be saved in library QGPL, will override the APPC device description just created with the CRTDEVPRT command.

At the command line, type: WRKAFP2 and press <F4>.

Printer device name	DEVD	OPTRA
(Same user defined name as before)
IPDS pass through	IPDSPASTHR	*YES
TCP/IP support	TCP/IP	*YES
Press <ENTER>
Remote System	RMTSYS	157.184.67.102
(IP address or remote system host name)
Port	PORT	9100

(9100 or 9600 for MarkNet internal print server)

(9100 for Parallel 1 on MarkNet Pro external print server or MarkNet XLe) (9102 for Parallel 2 on MarkNet Pro external print server or MarkNet XLe)

Refer to 4.3.14 IPDS Timeout on page 40 for further information on the selection of ports.

Press <ENTER>

Inactivity timer INACTTMR *SEC15

Press <ENTER> to create the data area.

All values must be re-entered if any changes are made to any of the values in WRKAFP2; otherwise all values are reset to the default value.

93