Lexmark 3455 manual Printable Area, Whole, Physical, Full

4.3.7 Printable Area

This option defines the printable area on the page and how clipping is performed. Top, bottom, and side margins for your print jobs are set through your print application.

4028 Whole Page*	The printable area is 50 pels (4mm) inside the physical page. The
	printable area is reported to the host. Clipping occurs if data is
	printed outside the printable area. All four edges will clip.
4028 Print Page	The printable area is 50 pels (4mm) inside the physical page. The
	printable area is reported to the host. If the logical page is outside
	the printable area it is moved down and to the right. The right and
	bottom edges will be clipped.
Physical Page	The printable area is the physical page (edge to edge). The
	physical page printable area is reported to the host. With this
	setting active, you may need to adjust the left margin setting.
	Note:	Only the Optra S/Se printer can physically print edge
		to edge. No clipping will occur. Continual printing
		within 50 pels of the paper edge is not recommended.
		It can result in poor print quality and paper jams due
		to toner contamination of the paper path. All other
		printer models will report the physical page printable
		area but will clip any text printed within 50 pels of any
		edge.
Full Page	The job is formatted for a page using a printable area, which is
	edge to edge. However, when the page is actually printed, the
	page image is compressed 2% in both the horizontal and vertical
	directions.
	Note:	Full Page is only available on the Optra S/Se printer
		models.

34