Lexmark 3455 manual Universal Size, Menu Option Value Range Function

same way, i.e. with the preprinted side face up and the top edge of the page facing toward the rear of the printer.

4.5.7 Universal Size

A paper size of Universal is displayed in the printer menu when a non-standard size paper is detected in an auto size sensing tray or Universal is selected in the IPDS PAPER HANDLING menu as the paper size loaded into a non-size sensing tray or feeder. This option allows you to specify the paper size returned to the host when a non-standard paper size is loaded. The paper size is specified in 300 dots per inch.

Important:		The default paper size value returned to the host is 215.9 x 355.6 mm
		(8.5 x 14.0 in.). A 34 Short Paper error will be displayed if printing
		occurs past the length of the physical paper. You should specify the
		actual paper size to avoid this error.
Note:		This option is only available on IPDS code level 9241 or above.
	Menu Option	Value Range	Function
	Paper Length	4200*, 1500 to 4200	Specifies Universal paper length. See note below.
	Paper Width	2550*, 825 to 2703	Specifies Universal paper width. See note below.
Note:		The printer paper trays and feeders are limited to feeding of specific
		paper sizes. The IPDS paper length and width selectable range is
		from the smallest to largest size paper which can be fed through the
		printer. Refer to your printer documentation when loading a non-
		standard paper size to determine if that paper size can be fed from
		that tray or feeder.

Conversion example:

52