Lexmark 3455 manual Printer Sharing Parameters

7.8.2 Printer Sharing Parameters

To enable the printer to start other print jobs from another protocol, interface or server the following parameters on the PRINTDEV statement have to be coded in the PSF STARTUP PROC:

MGMTMODE=OUTAVAIL

DISCINTV=15

TIMEOUT=REDRIVE

FAILURE=WCONNECT

IPADDR=157.184.67.102

(address available from your network administrator)

PORTNO=9100

(9100 or 9600 for MarkNet internal print server)

(9100 for Parallel 1 on MarkNet Pro external print server or MarkNet XLe)

(9102 for Parallel 2 on MarkNet Pro external print server or MarkNet XLe)

Refer to 4.3.14 IPDS Timeout on page 40 for further information on the selection of ports.

The value (15) for DISCINTV specifies the time in seconds after which PSF ends the printer session when no output is available. The valid range is from 0 to 8160 seconds. The default value is 0. If DISCINTV=0, the PSF does not end the printer session when no output is available.

The MarkNet internal print server has a network inactivity timer called Job Timeout. The MarkNet Pro external print server and the MarkNet XLe adapter has a network

110