Lexmark 3455 manual 1 AS/400 Recommended Procedure

6.3.1 AS/400 Recommended Procedure

The IPDS session must be closed after the text job has been sent to the printer to activate the new IPDS option settings. The changes take effect during the next established IPDS session.

The following steps are recommended to remotely change the printer IPDS option settings.

1.End all writers associated with the printer except the writer to be used to send the text job.

2.Hold all print jobs in the printer job queue to be used to print the option setting changes.

3.Print the text job with the option setting changes.

4.End the IPDS session with the printer so the option changes will be activated during the next IPDS session. "Vary Off" the printer for locally attached devices and end the writer for LAN attached printers to end the IPDS session.

5.Review the IPDS Option Change Status page which was printed for any errors.

6.Recycle the printer power if the operator panel displays the message Recycle PWR to activate value. This is displayed if the IPDS emulation or the duplex setting was changed. See section 6.1 Settings That Require Operator Intervention on page 73 for more information.

7.Print a Print Menus page and review the IPDS default settings to be sure they have been set correctly.

8.Release queues held in step 1.

75