Lexmark 3455 manual Default Fgid, Default CPI, 43xx Fgid See page 156, 160, 416

4.3.4 Default FGID

Selects the default FGID to be used by the printer IPDS emulation when the host does not send an FGID at the start of a job. This option is only available on IPDS emulation code level 8141 or higher.

The option has three submenus containing the FGIDs used in each emulation. In the table below the emulations are cross-referenced to pages in appendix B. Font and Code Page Information. The FGIDs in the referenced tables are available in the operator panel.

Option name Values

3812/3816 FGID See page 158, 160, and 165

4028/31xx FGID See page 156, 160, and 165

43xx FGID See page 156, 160, and 165

The 4028/31xx and 43xx printers all use 300 pel fonts. Selecting a Default FGID value under the 4028/31xx menu or the 43xx menu will automatically change the Default FGID value of the other 300 pel emulations. The 3812/16 FGID is not affected by the other menu selections.

11*	Default FGID for 3812/3816.
416*	Default FGID for 4028/31xx and 43xx. When using a CPI value
	of 10.0 FGID 416 is equal to FGID 11.

4.3.5 Default CPI

Selects the default characters per inch (CPI) to be used by the printer IPDS emulation when the host does not send a CPI value at the start of a job. The option does not apply to the fixed pitch fonts. This option is only available on IPDS emulation code level 8141 or higher.

The range is 5.0 to 30.0.

10.0* Default CPI

32