Lexmark 3455 manual Example 1 Margins

Margins may be adjusted for all input trays and feeders using the All Input Trays menu. Additional adjustments may be made to the All Input Trays margin settings for an individual tray or feeder using the tray or feeder specific margin menu. Most often, the All Input Trays margin settings will remain at the default setting of zero and adjustments will be made using the specific tray or feeder margin menu. The All Input Trays margin adjustment PLUS the specific tray or feeder margin adjustment determines the total margin adjustment for a specific tray or feeder.

Margin Adjustment = All Input Trays setting + Specific Tray / Feeder Setting

The SIMM for IPDS is limited by the printer’s printable area. The Margins menu may be used to adjust page images outside the valid printable area. The page image will be clipped. Valid Printable Area (VPA) exception conditions will not be reported to the host.

Margin adjustments are in 1/300ths of an inch.

Note: The Margins menu is only available on IPDS code level 8223 and above.

Example 1 – Margins

The All Input Tray Left Margin is set to the default of 0. The Tray 1 Adjust Left Margin is set to +25. This adjusts the page image left margin for all pages printed from tray 1 by 25/300ths of an inch to the right of the margin specified in the IPDS job.

Example 2 – Margins

The All Input Tray Left Margin has been adjusted to –25 . This moves the left margin for pages printed for all IPDS jobs 25/300ths of an inch to the left. The Tray 1 Adjust Left Margin has been adjusted to +25. For tray 1, the additional Tray 1 Adjust Left Margin value will also be used to adjust the left margin. The tray 1 left margin adjustment will be zero for pages printed from tray 1. The All Input Trays Left Margin adjustment PLUS the Tray 1 Adjust Left Margin adjustment equals the total left margin adjustment. {–25 pels +25 pels = 0 adjustment}

62