Lexmark 3455 manual

11.Plug in the printer power cord.

12.Turn the printer power ON (I).

Note: If all diamonds remain displayed on the printer operator panel or if the printer does not warm the engine and display Ready on the operator panel, follow the steps in the next section to remove the SIMM and repeat the steps in this section to reinstall it. Be sure the SIMM can be used in your printer model. Refer to step 2 for SIMM identification.

A minimum of 4 MB of memory is required for IPDS printing. If there is less than 4 MB of installed memory in the printer, the message Not enough memory for IPDS is displayed in the operator panel. This message is displayed at power on and when the IPDS MENU is accessed. The IPDS Menu settings can be accessed and configured but IPDS jobs can not be printed from the host. If there is less than 4 MB of installed memory, a message will also be printed on the IPDS Print Menus page. Jobs may be printed using other emulations.

13.Reset the factory defaults.

a.Press Menu> until TESTS MENU appears. Press Select.

b.Press Menu> until Factory Defaults appears. Press Select.

c.Restore appears. Press Select. Resetting Factory Defaults is displayed while the printer resets the defaults.

14.After you have finished installing the SIMM for IPDS, print a menu settings page to verify the installation. The printed page lists current menu settings and installed options.

a.Press Menu> until TESTS MENU appears. Press Select.

b.Press Menu> until Print Menus appears. Press Select.

c.Printing Menu Settings appears. The printer prints the menu settings pages, which includes the IPDS MENU default settings.

17