Lexmark 3455 manual Ipds Envelope Paper

4.5.3 IPDS Envelope Paper

This option selects the envelope default formatting size for the IPDS Envelope media source (most often it is the IPDS Number 64 (40H)). This option setting applies to Input Tray Mappings set to "Manual Env" or "Env Feeder".

You can do one of the following:

Use the printer setting Manual Env Size.

NUse the printer setting Env Feeder Size (if installed).

Select a different envelope size from the IPDS Menu. The selection applies to both Manual Env and Env Feeder.

Selecting a specific size under the IPDS Menu will change the media size selected for the Postscript and PCL emulations, too. It is recommended that the IPDS value remain at the default of use Prtr Setting and the specific media size be selected under PAPER SIZE from the printer's PAPER MENU.

Prtr (printer) Setting*	Use the envelope size from the Manual Env Size or Env
	Feeder Size printer default setting.
7 ¾ Envelope	7 ¾ Monarch envelope paper (3.875” x 7.5”)
9 Envelope	9 Commercial envelope paper (3.875” x 8.875”)
10 Envelope	10 Commercial envelope paper (4.125” x 9.5”)
DL Envelope	DL envelope paper (110mm x 220mm)
C5 Envelope	C5 envelope paper (162mm x 229mm)
B5 Envelope	B5 envelope paper (176mm x 250mm)
Other Envelope	The Other Envelope setting enables the use of non-
	standard envelopes. The media size returned to the host is
	specified with IPDS menu option Other Env Size. Refer to
	section 4.5.8 Other Env Size on page 53 for more
	information. The default media size returned to the host is
	215.9 x 355.6 mm (8.5 x 14.0 in.). The position of the
	printed data has to be adjusted by the host or by the print
	application. This is necessary as the IPDS starting position
	(0,0) often will be outside the physical paper. How the
	printed data has to be adjusted, depends on which envelope
	edge is printed first. Refer to the figure below matching
	your printer.

47