What happens in each

When the Cycle Control Knob is set to a number and pulled out, the washer fills (to the selected load size with the selected water temperature) before agitation and timing start. The washer will begin agitating immediately after filling; agitation can occur with the washer lid up or down. After agitation starts, the knob turns clockwise until it points to OFF and the cycle ends.

The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.

Regular and Short cycles

Fill to selected load size

Wash selected time

Drain-No agitation

Spin

M4 Fill

w Rinse

Drain-No agitation

Spin

cycle

Permanent Press cycle

Fill to selected load size

Wash selected time

u-+- Partial drain&o agitation

Fill to selected load size

Brief agitation

Drain-No agitation

Fill

Rinse

Drain-No agitation

Spin

w

9

Page 9
Image 9
Whirlpool TAWM400A warranty What happens in each, Cycle, Regular and Short cycles