Whirlpool TD2500XF0 manual Setting the water level adjustment

PAN FULL HUMIDISTAT

E

3.If you need more dehumidification, turn control clockwise. Unit will run continuously at DRYEST setting. If you need less dehu- midification, turn control counterclockwise.

PAN FULL HUMIDISTAT

0

NOTE: Do not operate your dehumidifier in temperatures below 65°F (18.3%). The coil may become iced over at low temperatures and the unit will not operate properly.

4.Stop the unit manually by turning the control to OFF.

Setting the water level adjustment

The Water Level Adjustment can be set in two positions to turn off the unit automatically when the pan is full. This prevents the danger of overflow.

Pan must be in proper position for Water Level Control Switch to work.

WATER LEVEL	:WITCH
	CONTROL L... . __.

NOliMAL

FILL POSITlO?-<

MAXIMUM FILL

I POSITION

NORMAL FILL POSITION

Set Water Level Control Lever to the indenta- tion on the left side. The water pan and water will weigh approximately 16 Ibs. (7.2 kg) and water pan will be ‘/2full.

MAXIMUM FILL POSITION

Set Water Level Control Lever to the raised area on the right side. The water pan and water will weigh approximately 24 Ibs. (10.8 kg) and water pan will be % full.

The Water Level Control Switch will automati- cally turn off the dehumidifier at the fill level you selected when pan is properly placed. Loosen the screw to move the Water Level Adjustment. Retighten screw when adjusted.

6