Whirlpool TD2500XF0 manual Troubleshooting

Models: TD2500XF0

1 12
Download 12 pages 52.09 Kb
Page 10
Image 10
Troubleshooting

Troubleshooting

Performance problems often result from little things you can find and fix without tools of any kind. Please check the chart below for problems you can fix. It could save you the cost of a service call.

PROBLEM

Unlt will not run

Unit runs

but does not dehumidify

POSSIBLE CAUSE

l Is unit plugged into a live circuit with the proper voltage?

l Is the Humidistat Control set to a position other than OFF? Try a drier setting.

l Has a household fuse blown or circuit breaker tripped? Use the correct time-delay fuses. Do not use an extension cord.

l Is unit in defrost cycle (on 50-pint models only)?

Coils

ice over

l

 

 

l

Water

collects

l

on floor

l

 

I

l

Is room temperature below 65°F (18.3”(Z)? Coils will become iced over at low temperatures.

Are coils clogged with lint? Clean lint from coils (see “Caring for your dehumidifier” on pages 8-9).

Is unit reasonably level? Level unit front to back and side to side.

Is hose kinked or drain clogged?

Is water pan overflowing? Remove and empty water pan. Replace pan properly and check to see that unit is level.

NOTE: When moving your dehumidifier, keep the unit in an upright position.

10

Page 10
Image 10
Whirlpool TD2500XF0 manual Troubleshooting