Whirlpool TGR51WOW surface, burners, Setting the clock, Using the Minute Timer

Models: TGR51WOW

1 12
Download 12 pages 57.2 Kb
Page 4
Image 4
Using the

Model TGR51 WOW

Left rear

Oven temperature

Right

rear

Oven

light

control knob

control

control

knob

switch

,

Left front

&face’

 

R&ht

front

control

knob

burner

indicators

control

knob

Using the

surface

burners

In case of a prolonged power failure

 

 

 

Surface burners can be manually lighted. Hold a lit match near a burner and slowly turn the control knob on until the burner lights. After the burner lights, turn the control knob to the desired setting.

Setting the clock

Push in and turn the Minute Timer Knob to set the Clock.

1.Push in Minute Timer Knob and turn clockwise until clock shows the right time of day.

2.Let the Minute Timer Knob pop out. Turn clockwise until Minute Timer hand points to OFF. The clock setting will change if you push in the knob when turning.

Using the Minute Timer

00

01

Control knobs must be pushed in, then turned to the LITE position. The clicking sound is the ignition sparking.

To stop the clicking sound after the burner lights, turn the control knob back to a desired setting. The control knob can be set anywhere between HI and OFF.

Surface burner indicators

The solid dot in the surface burner indicator shows which surface burner is turned on by that knob.

Until you get used to the settings, use the following as a guide. For best results, start cooking at the high settings; then turn the control knob down to continue cooking.

Use LITE to light the burner. After the burner lights, turn control back to a desired setting to stop the clicking of the ignition.

Use HI to start foods cooking; to bring liquids to a boil.

Use a medium setting to continue cooking or to fry chicken or pancakes; for gravy, puddings and icing; to cook large amounts of vegetables.

Use a low setting to keep food warm until ready to serve.

NOTE: Do not cook with the control in the LITE position.

Burn, Fire and Explosion Hazard

l Burner flame should not extend beyond the edge of the cooking utensil. The flame can burn you and cause poor cooking results.

l Be sure all control knobs are turned to OFF when you are not cooking. Someone could be burned or a fire could start if a burner is accidentally left ON.

9 If the flame should go out while cooking, or if there is a strong gas odor, turn the burners OFF. Wait five minutes for the gas odor to disappear, before relighting burner. If gas odor is still present, see safety note on page 2. Failure to follow these precautions could result in explosion or fire.

l Do not attempt to light the oven burner during a power failure. Personal injury could result.

The Minute Timer does not start or stop the oven. It works like a kitchen timer. Set it in minutes up to an hour. You will hear a buzzer when the set time is up.

Do not push in the knob when setting the Minute Timer.

1.Without pushing it in, turn the Minute Timer Knob until the timer hand passes the setting you want.

2.Without pushing in, turn the knob back to the setting you want.

When the time is up, a buzzer will sound. To stop the buzzer, turn the Minute Timer hand to OFF.

NOTE: Pushing in and turning the Minute Timer Knob changes the clock setting.

Page 4

Page 4
Image 4
Whirlpool TGR51WOW installation instructions surface, burners, Setting the clock, Using the Minute Timer