Whirlpool TGR88W2B manual The oven light, To replace the oven light

PART	WHAT TO USE
Oven racks	Steel-wool pad and
	warm, soapy water
	OR
	The Self-Cleaning cycle

Oven door glass Paper towel and spray glass cleaner

OR

Warm, soapy water and a nonabrasive, plastic scrubbing pad

Oven cavity Self-Cleaning cycle

The oven light

The oven light will come on when you press the Oven Light Switch on the backguard.

Electrical Shock and

Personal Injury Hazard

l Make sure oven and light bulb are cool and power to the range has been turned off before replacing the light bulb. Failure to do so could result in electrical shock or burns.

*The bulb cover must be in place when using the oven. The cover protects the bulb from breaking, and from high oven temperatures. Because bulb cover is made of glass, be careful not to drop it. Broken glass could cause injury.

To replace the oven light:

1.Unplug appliance or disconnect at the main power supply.

HOW TO CLEAN

l Wash, rinse and dry thoroughly.

OR

l Leave in oven during Self-Cleaning cycle.

NOTE: Racks will permanently discolor and become harder to slide if left in oven during Self-Cleaning cycle. Apply a small amount of vegetable oil to the side rungs to aid sliding.

l Make sure oven is cool.

l Follow directions provided with the cleaner.

l Wash, rinse and dry thoroughly.

l See “Using The Self-Cleaning Cycle” on pages 20-22.

27