PROBLEM |
| POSSIBLE CAUSE | ||
Nothing will | The | flow of combustion | and/ | |
operate | or ventilation air to the | range | ||
(continued) | is blocked. |
|
| |
The oven will | The | Oven | Selector is not | |
not operate | turned to BAKE or BROIL. | |||
| A delayed start time has | |||
| been | set. |
|
|
| The | Oven | Temperature |
|
| Control is not turned to a | |||
| temperature | setting. |
| |
The automatic MEALTIMER clock is not set correctly.
The Stop or Start Time Knobs for the automatic MEALTIMER clock are not set at the correct time of day.
Burner fails to The power cord is not
lightplugged into a live circuit with proper voltage.
A household fuse has blown or a circuit breaker has tripped.
|
| Burner | ports | are | clogged. | |
Burner | flames | Burner | ports | are | clogged. | |
are uneven |
|
|
|
|
| |
Burner | makes | Burner | is wet | from | washing. | |
popping | noise |
|
|
|
|
|
when on |
|
|
|
|
| |
Control | knOb(S) | You are | not pushing | in before | ||
will not | turn | turning. |
|
|
|
|
SOLUTION
Remove blockage to airflow to and around range.
Turn the Oven Selector to the desired setting.
Wait for the start time to be reached.
Push in and turn the Oven Tempera- ture Control to a temperature setting.
Set the MEALTIMER clock correctly. (See “Usingthe automatic MEALTIMER” clocK’ on page 16.)
If a delay start or stop is not desired, the Stop and Start Time Knobs must be turned to the correct time of day. Turn knobs till they pop out.
Plug the power cord into a live circuit with proper voltage. (See Installation Instructions.)
Replace household fuse or reset circuit breaker. In case of prolonged power failure, manually light burners (see page 8).
Clean with a straight pin (see page 25).
Clean with a straight pin (see page 25). If this fails, call an authorized Whirlpool@ service technician for service.
Let dry.
Push control knob(s) in before turning to a setting.
continued on next page
29
