2.Remove the glass bulb cover in the back of the oven by pushing the wire holder to the side and pulling out bulb cover.
3.Remove the light bulb from its socket. Replace the bulb with a
4.Replace the bulb cover and snap the wire holder into place. Plug in appliance or reconnect at the main power supply.
NOTE: The oven light should not be used during the
If You Need Assistance
Or Service
This section is designed to help you save the cost of a service call. Part 1 of this section outlines possible problems, their causes, and actions you can take to solve each problem. Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our Consumer Assistance Center for help or calling for service, please provide a detailed descrip- tion of the problem, your appliance’s complete model and serial numbers and the purchase date. (See page 2.) This information will help us respond properly to your request.
1. Before calling for assistance . . .
Performance problems often result from little things you can find and fix without tools of any kind. Please check the chart below for problems you can fix. It could save you the cost of a service call.
PROBLEM POSSIBLE CAUSE
Nothing will The power cord is not
operateplugged into a live circuit with proper voltage.
Range is not properly con- netted to gas supply.
A household fuse has blown or a circuit breaker has tripped.
Controls are not set correctly.
SOLUTION
Plug the power cord into a live circuit with proper voltage. (See Installation Instructions.)
Contact an authorized Whirlpoop service technician to reconnect range to gas supply. (See Installation Instructions.)
Replace household fuse or reset circuit breaker.
Reset controls, if needed.
28
