MICROWAVE OVEN
CONTROL
Display
When power is first supplied to the microwave oven, a “:” will blink on the display. Touch OFF/CANCEL to stop the blinking.
Any other time a “:” blinks on the display, a power failure occurred. Touch OFF/CANCEL and reset the clock if needed.
When the microwave oven is in use, the display shows cooking power, quantities, weights and/or prompts.
If “RETRY” blinks on the display for 1 second, an invalid value was entered. Retry your entry.
When the microwave oven is not in use, the display shows the time of day or Timer countdown.
Start/Enter
The START/ENTER pad begins any function. If not touched after touching a pad, “START?” will appear in the display.
If cooking is interrupted, touching START/ENTER will resume the preset cycle.
Off/Cancel
The OFF/CANCEL pad clears any incorrect command and cancels any program during cooking. It will not erase the time of day.
The microwave oven will also turn off when the door is opened. Close the door and touch START/ENTER to resume the cycle.
Add A Minute
Cook time may be added in
Touching ADD A MINUTE during a cook cycle will add 1 minute of cook time at the current cook power.
Touching ADD A MINUTE when the microwave oven is not in use, or after a cook cycle has ended, will start the microwave oven for 1 minute of cook time at 100% cook power.
Number Codes
The microwave oven is preset with shortcut number codes. A number code includes one or more of the following: cooking power, cook time and food quantity or weight. See the charts in the “Cooking” and/or “Reheating” sections for additional information.
Clock
This is a
To Set:
The microwave oven and timer must be off.
1.Touch CLOCK.
2.Touch the number pads to set the time of day.
3.Touch CLOCK or START/ENTER.
To Remove:
1.Touch CLOCK.
2.Touch 0.
3.Touch CLOCK.
The time will disappear and “:” will appear on the display.
6
