Whirlpool TVF15FR Using Your Freezer, Install and level freezer, Setting the temperature control

F. Install and level freezer

Level freezer so the door will stay open at any position.

Leveling leg

I( I

Lower

Using Your Freezer

Model and serial numf ler label-

(on side WL3/I)

Temperatu re

controt--

Refrigerate stationary

Stationary door shelves

7

1. Locate, remove and discard the 4 bolts
	that held the freezer in the shipping
	crate.
2.	Locate the	2 front leveling	legs	among
	the packing	materials.
3.	Screw these legs into the		front	holes on
	the bottom of the freezer. The back of the
	freezer rests on 2 fixed supports.
4.	Adjust the	2 front legs so freezer does
	not rock.
5. Connect freezer to proper electrical
	supply and attach retaining clip. (Refer to
	“D.Locate proper electrical supply” on

shelves

Lower storage

gate.

7

\

(Key eject

,/lock

	paw	2.1
6.	Slide	freezer	into	place.
7.	Place	a level	on top		of the	freezer -	first
	side to side then front to back. Turn leg
	clockwise to raise a corner. Turn leg
	counter-clockwise			to lower a corner.
8.	Repeat step		7 until		the freezer is level.
9.	After	freezer	is fully		loaded,	recheck	with
	level.

Base grit/e

Leveling

Setting the temperature control

0

NOTE: When the freezer is first staried. the compressor will run constantly until the cabinet is cooled. It may take up to 6 to 8 hours or longer, depending on room temperature and the number of times the freezer door is opened.

After the cabinet is cooled, the compres- sor will turn on and off as needed to keep the freezer at the proper temperature.

Turn the control to 4. This setting is designed to maintain the temperature at or near 0°F (-17.8%) under normal operating conditions.

Allow the freezer to cool 6 to 8 hours before filling with frozen food. Let the freezer cool overnight before adding large amounts of unfrozen food. Never add more than 2-3 pounds of unfrozen food per cubic foot of freezer space

The outside of your freezer may feel warm. This is normal. The freezer’s design and main function is to remove heat from packages and air space inside the freezer. This heat is transferred to the room air, so the outside of the freezer may feel warm.

Adjusting the temperature control

lTurn control to a higher number for colder temperatures.

*Turn control to a lower number for less cold temperatures.

Page 3