Level theWasher

The right front foot has been installed at a different height on your new washer. The other three feet were preset at the factory. Properly leveling your washer will minimize excessive noise and vibration.

1.Push on the upper front panel to be sure that the washer is on the rear feet. Lower the right front foot until it contacts the floor. Check the levelness of the washer by placing a level on the top edge of the washer, first side to side, then front to back.

CompleteInstallation

1.Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended grounding method. See “Electrical Requirements.”

2.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

3.Check that you have all of your tools.

4.Dispose of/recycle all packaging materials.

5.Check that the water faucets are on.

6.Check for leaks around faucets and inlet hoses.

If the washer is against a wall, move the washer out slightly before tipping back. First prop the front with a wood block and adjust the feet as necessary; then prop the back and adjust feet as necessary. Repeat this step until washer is level.

2.Make sure that all four feet are stable and resting on the floor. Then check that the appliance is perfectly level (use a level).

3.After the washer is level, use a 14 mm open-end wrench to turn the nuts on the feet tightly against the washer cabinet.

IMPORTANT: All four feet must be tightened. If the nuts are not tight against the washer cabinet, the washer may vibrate.

4.When you are pushing on the edges of the washing machine top plate, the machine should not move front to back, side to side, or diagonally.

5.Slide the washer to its final location.

6.Confirm the levelness of the washer.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

7.Plug into a grounded 3 prong outlet.

8.Read “Washer Use.”

9.To test and to clean your washer, measure ¹⁄₂ the detergent manufacturer’s recommended amount of HE High Efficiency detergent for a medium-size load. Pour the detergent into the detergent dispenser. Select NORMAL/CASUAL, and then select START. Allow the washer to complete one whole cycle.

Use only HE High Efficiency detergent.

10

Page 9 Page 11
Page 10
Image 10
Whirlpool W10063560 manual Level theWasher, CompleteInstallation
Page 9 Page 11

W10063560 specifications

The Whirlpool W10063560 is a highly efficient refrigerator water filter designed to enhance the quality of drinking water by reducing contaminants and ensuring a consistent supply of clean water for your family. This advanced filter is compatible with a range of Whirlpool refrigerator models, making it a versatile choice for many households.

One of the main features of the W10063560 is its ability to reduce harmful substances such as chlorine, lead, and particulates, providing you with fresher and better-tasting water. By effectively filtering out these impurities, it not only improves the taste and odor of your water but also promotes a healthier lifestyle by reducing the potential for exposure to harmful chemicals.

The installation of the W10063560 filter is straightforward, allowing users to easily replace the old filter without the need for specialized tools. The filter typically needs to be replaced every six months, depending on water quality and usage, ensuring that you always have access to purified water. An indicator light on the refrigerator may alert you when it’s time for a replacement, making maintenance hassle-free.

In addition to its filtration capabilities, the W10063560 incorporates advanced technologies that enhance its performance. The filter features a high-grade carbon block, which effectively captures small particles and impurities. This technology ensures that the water flows effortlessly while maintaining high filtration efficiency, enabling consumers to enjoy clean water without compromising water pressure.

Another characteristic of this filter is its exceptional size compatibility, which fits various Whirlpool refrigerator models equipped with a filtered water dispenser. Its compact design ensures that it does not take up unnecessary space, allowing for a seamless integration into your refrigerator’s existing configuration.

This water filter also meets stringent industry standards, making it a reliable option for ensuring safe drinking water for your family. It has been tested and certified to the standards set forth by the NSF International, verifying its effectiveness in removing certain contaminants from drinking water.

In summary, the Whirlpool W10063560 water filter is an essential accessory for any Whirlpool refrigerator, promoting the health and well-being of families by delivering clean, refreshing water. With its ease of installation, advanced filtration technologies, and compatibility with various refrigerator models, it stands out as a top choice for consumers looking to improve their water quality.
Top Page Image Contents