Whirlpool W10131955C Product Dimensions, Cabinet Dimensions, Metal Cooktops

Product Dimensions

Metal Cooktops

A

B

C

A. 31⁷⁄₁₆" (79.8 cm) on 30" (76.2 cm) models, 37⁹⁄₁₆" (95.4 cm) on 36" (91.4 cm) models

B. 21¹⁄₄" (53.4 cm)

Cabinet Dimensions

IMPORTANT: If installing a range hood or microwave hood combination above the cooktop, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.

A

D

CB

C. 2⁷⁄₈" (7.3 cm)

Straight-edge glass cooktops

B

M

K E

FG

H

A C

A. 20⁵⁄₁₆" (51.5 cm)

B. 30³⁄₁₆" (76.8 cm) on 30" (76.2 cm) models, 36⁷⁄₁₆" (92.5 cm) on 36" (91.4 cm) models

C. 2⁷⁄₈" (7.3 cm)

Curved-edge glass cooktops

B

A

C

A. 21¹⁄₈" (53.7 cm)

B. 30⁵⁄₁₆" (77.0 cm) on 30" (76.2 cm) models, 36⁵⁄₁₆" (92.3 cm) on 36" (91.4 cm) models

C. 2⁷⁄₈" (7.3 cm)

LJ

JI

A. 30" (76.2 cm) on 30" models; 36" (91.4 cm) on 36" models

B. Combustible area above countertop (shown by dashed box above)

C. 30" (76.2 cm) minimum clearance between top of cooktop platform and bottom of uncovered wood or metal cabinet (24" [61 cm] minimum clearance if bottom of wood or metal cabinet is covered by not less than ¹⁄₄" [0.6 cm] flame retardant millboard covered with not less than No. 28

MSG sheet steel, 0.015" [0.04 cm] stainless steel, or

0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper) D. 13" (33 cm) recommended upper cabinet depth

E. 2¹⁄₈" (5.4 cm) F. 19" (48.3 cm)

G. 18" (45.7 cm) minimum clearance from upper cabinet to countertop within minimum horizontal clearances to cooktop

H. Grounded outlet - Locate within 24" (61 cm) of right rear corner of cutout

I. 29" (73.7 cm) on 30" models; 35¼" (89.5 cm) on 36" models

J. 8³⁄₈" (21.3 cm) minimum distance to nearest left and right side combustible surface

K. 2⁷⁄₈" (7.3 cm) minimum distance to rear combustible surface

L. Gas line opening - Wall: Anywhere 5" (12.7 cm) below underside of countertop. Cabinet floor: anywhere within 6" (15.2 cm) of rear wall is recommended

M. 24" (61 cm) minimum countertop depth is required

NOTES: After making the countertop cutout, some installations may require notching down the base cabinet side walls to clear the cooktop base. To avoid this modification, use a base cabinet with sidewalls wider than the cutout.

If cabinet has a drawer, a 4" (10.2 cm) depth clearance from the countertop to the top of the drawer (or other obstruction) in base cabinet is required. The drawer depth may need to be shortened to avoid interfering with the regulator.

4