LocationRequirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

1/2" (1.25 cm)

2" (5.08 cm)

NOTES:

■It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).

■Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed against an extended wall and the ability to remove the crisper pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet opening width of 54"

(137.16 cm) is recommended.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See “Using the Controls.”

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

3

Page 2 Page 4
Page 3
Image 3
Whirlpool W10162451A, W10162450A LocationRequirements, Electrical Requirements, Water Supply Requirements, Tools Needed
Page 2 Page 4

W10162451A, W10162450A specifications

The Whirlpool W10162450A and W10162451A are premium dishwasher models designed to deliver high performance, durability, and exceptional cleaning results. These dishwashers are equipped with advanced technologies that not only enhance the user experience but also ensure efficient water and energy consumption.

One of the standout features of these models is the Soil Sensor technology, which detects the level of soil on dishes and adjusts the wash cycle accordingly. This ensures that heavily soiled items receive a more intense wash, while lightly soiled dishes can undergo a quicker cycle. This smart feature optimizes cleaning efficiency while conserving water and energy.

Both the W10162450A and W10162451A come equipped with the Adaptive Wash System. This innovative system utilizes multiple wash arms that distribute water evenly throughout the dishwasher. As a result, users can expect a thorough clean, even in hard-to-reach areas. Ensuring that every dish, pot, and pan emerges spotless is a priority for Whirlpool, and these models achieve that effortlessly.

Another notable feature includes the Quiet Partner sound package. Operating at just 47 decibels, these dishwashers are designed to perform quietly in the background, making them ideal for open-plan living spaces or homes where noise is a concern. Users can initiate a wash cycle at any time without disturbing family members or guests.

The W10162450A and W10162451A are also equipped with a third rack, which maximizes loading flexibility. This additional space allows for the placement of small or odd-shaped items, helping to create more room in the lower racks for larger dishware. The adjustable tines and customizable loading options further enhance the versatility of these dishwashers.

Energy efficiency is another key characteristic of these Whirlpool models. They are ENERGY STAR certified, indicating that they meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only helps users save on energy bills but also contributes to environmental sustainability.

In summary, the Whirlpool W10162450A and W10162451A dishwashers are equipped with an array of features and technologies that combine to deliver an exceptional dish-cleaning experience. With innovations such as Soil Sensor technology, an Adaptive Wash System, quiet operation, and energy efficiency, these models represent a perfect choice for households seeking quality and performance in their kitchen appliances.
Top Page Image Contents