NOTE: Your ice maker has an automatic shutoff. The ice maker sensors will automatically stop ice production, but the control will remain in the ON (left) position.

REMEMBER:

■Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

■The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

■Do not use anything sharp to break up the ice in the storage bin. This can cause damage to the ice container and the dispenser mechanism.

■Do not store anything on top of or in the ice maker or storage bin.

Removing and Replacing Ice Storage Bin

Style 1

1.Pull the covering panel up from the bottom and then slide it back toward the rear.

2.Lift the wire shutoff arm so it clicks into the OFF (up) position. Ice can still be dispensed, but no more can be made.

3.Lift up the front of the storage bin and pull it out.

4.Replace the bin by pushing it in all the way or the dispenser will not work. Push the wire shutoff arm down to the ON position to restart ice production. Make sure the door is closed tightly.

Style 2

1.Hold the base of the storage bin with both hands and press the release button to lift the storage bin up and out.

NOTE: It is not necessary to turn the ice maker control to the OFF (right) position when removing the storage bin. The sensor cover (“flipper door”) on the left wall of the freezer stops the ice maker from producing ice if the door is open or the storage bin is removed.

2.Replace the storage bin on the door and push down to make sure it is securely in place.

Water Filtration System

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Water Filter Status Light (on some models)

The water filter status light will help you know when to change your water filter. When the water filter status display changes from “GOOD” to “ORDER,” this tells you that it is almost time to change the water filter cartridge. Replace the water filter cartridge when the water filter status display changes to “REPLACE.” If water flow to your water dispenser or ice maker decreases noticeably, change the filter sooner. The filter should be replaced at least every 6 months depending on your water quality and usage.

After changing the water filter, reset the status light by pressing and holding the FILTER button for 3 seconds. The status light will change from “REPLACE” to “GOOD” when the system is reset.

Changing the Water Filter

1.Press the eject button to release the filter from the base grille.

2.Pull the filter straight out.

3.Turn the cap counterclockwise to remove it from the filter.

IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter.

4.Align the ridge on the cap with the arrow on the new filter and turn the cap until it snaps into place.

NOTE: You can run the dispenser without a filter. Your water will not be filtered. Simply insert the cap all of the way into the base grille and rotate the cap until it is firmly in place.

5.Remove the protective covers from the O-rings. Be sure the O-rings are still in place after the covers are removed.

6.Push the filter into the base grille. The eject button will pop back out when the filter is fully engaged.

7.Flush the water system. See “Water and Ice Dispensers.”

REFRIGERATOR CARE

Cleaning

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to avoid buildup of odors. Wipe up spills immediately.

IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To avoid odor transfer and drying out of food, wrap or cover foods tightly.

8

Page 7 Page 9
Page 8
Image 8
Whirlpool W10167096A, W10167111A installation instructions Refrigerator Care, Water Filtration System, Cleaning
Page 7 Page 9

W10167111A, W10167096A specifications

Whirlpool is synonymous with innovation in home appliances, and its model numbers W10167096A and W10167111A illustrate this commitment. These units are designed to enhance the kitchen experience, providing efficient solutions for everyday needs.

The Whirlpool W10167096A and W10167111A exemplify the brand's dedication to practical features. Both models are compatible with a variety of Whirlpool dishwashers, ensuring seamless integration within existing setups. Their designs focus on maximizing cleaning efficiency and convenience.

One of the standout features of these models is their advanced filtration system. This ensures that food particles and debris are eliminated effectively from dishes, resulting in sparkling clean plates, glasses, and utensils. Users appreciate the focus on hygiene, as this filtration aids in creating a cleaner dishwasher environment, which translates to better washing results.

Additionally, the W10167096A and W10167111A incorporate noise reduction technology. Practical for family settings, these appliances operate quietly, allowing for a peaceful kitchen environment while the dishes are being cleaned. This feature is particularly beneficial for open-plan living spaces or during evening hours when silence is desired.

Another notable characteristic is their energy efficiency. Designed with a focus on sustainability, these models consume less water and energy compared to traditional dishwashing methods. They help lessen the environmental impact while also reducing utility bills, a significant advantage for eco-conscious consumers.

Ease of use is another primary consideration in these models. They often come with user-friendly controls and are straightforward to install, making them attractive options for those who want to upgrade their kitchen without fuss. Additionally, both models are crafted with durable materials, ensuring longevity and resistance against wear and tear.

Overall, the Whirlpool W10167096A and W10167111A stand out for their blend of reliability and technology. With enhanced cleaning capability, noise reduction features, energy efficiency, and durable construction, they have quickly become essential tools in many households, facilitating a more effortless approach to kitchen cleanup. Investing in these models is not just about acquiring a dishwasher accessory; it’s about embracing a modern, efficient lifestyle in the kitchen.
Top Page Image Contents