Hand Held Products 2020/5620 system manual Maintenance, Cleaning the Scanner’s Window

12

Maintenance

Maintenance

Repairs and/or upgrades are not to be performed on this product. These services are to be performed only by an authorized service center. See "Customer Support" on page 13-1 for further information.

Cleaning the Scanner’s Window

Reading performance may degrade if the scanner’s window is not clean. If the window is visibly dirty, or if the scanner isn’t operating well, clean the window with a soft cloth or lens tissue dampened with water (or a mild detergent-water solution or alcohol). If a detergent solution is used, rinse with a clean lens tissue dampened with water only.

The base and scanner’s housing may also be cleaned the same way.

!Caution:

Do not submerge the imager in water. The scanner’s

housing is not watertight.

Do not use abrasive wipes or tissues on the imager’s window – abrasive wipes may scratch the window. Never use solvents (e.g., alcohol or acetone) on the housing or window – solvents may damage the finish or the window.

Inspecting Cords and Connectors

Inspect the base’s interface cable and connector for wear or other signs of damage. A badly worn cable or damaged connector may interfere with scanner operation. Contact your Hand Held Products’ distributor for information about cable replacement. Cable replacement instructions are on page 12-2.

IMAGETEAM™ 2020/5620 System Manual 12 - 1