Hand Held Products 2020/5620 Data Accumulation Mode, Beeper and LED Sequences and Their Meaning

Data Accumulation Mode

Scan the bar codes below to turn data accumulation (batch) mode on and off. If data accumulation mode is on, bar code data is stored when the scanner is out of range of the base and transmitted once the scanner is back in range.

Data Accumulation Mode On

* Data Accumulation Mode Off

Beeper and LED Sequences and Their Meaning

The IT5620 contains LEDs on the top of the unit to indicate its power up, communication, and battery status. Simply stated, red LED = error; green LED = success of any type. The unit’s audible indicators have meaning as well: 3 beeps = error; 2 beeps = menu change; 1 beep = all other successes.

The table below lists the indication and cause of the LED illumination and beeps for the IT5620.

IT5620 LED Sequences and Their Meaning

LED Indication	Beeper Indication	Cause
Normal Operation
Red Flash	None	Battery low
Green Flash	1 beep	Successful communication
		or linking
Red, blinking	3 beeps	Failed communication
Menu Operation
Green Flash	2 beeps	Successful menu change
Red, blinking	3 beeps	Unsuccessful menu change

IT2020 LED Sequences and Their Meaning

The base contains a red LED that indicates the status of the unit and verifies its communication with the host system and a green LED that indicates scanner battery charge condition.

IMAGETEAM™ 2020/5620 System Manual 1 - 9