All communication parameters between the scanner and terminal must match for correct data transfer through the serial port using RS-232 protocol. Scanning the RS-232 interface bar code, programs the scanner for an RS-232 interface at 38,400 baud, parity–none, 8 data bits, 1 stop bit, and adds a suffix of a CR LF.

RS-232 Interface

RS-232 Baud Rate

Baud Rate sends the data from the scanner to the terminal at the specified rate. The host terminal must be set for the same baud rate as the scanner.

Default = 38,400.

300

600

1200

2400

4800

9600

19200

* 38400

57,600

115,200

2 - 8

IMAGETEAM™ 2020/5620 System Manual

Page 46
Image 46
Hand Held Products 2020/5620 system manual RS-232 Baud Rate