RANGE CARE
Self-Cleaning Cycle(onsomemodels)
WARNING
Burn Hazard
Do not touch the oven during the
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result in burns.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the oven may result in discoloring, loss of gloss, hairline cracks and popping sounds.
Before
Once the oven has completely cooled, remove ash with a damp cloth. To avoid breaking the glass, do not apply a cool damp cloth to the inner door glass before it has completely cooled.
To stop the
The oven light will not function during the
Electronic Oven Control with Precise Clean™ Feature (on some models)
IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the
Do not block the oven vent(s) during the
Do not clean, rub, damage or move the oven door gasket.
Prepare Range
■Remove the broiler pan, grid, cookware and bakeware, all cooking utensils, oven racks and aluminum foil and, on some models, the temperature probe from the oven.
■Use a damp cloth to clean inside door edge and the
1½" (3.8 cm) area around the inside oven cavity frame, being certain not to move or bend the gasket.
■Remove plastic items from the cooktop because they may melt.
■Remove all items from the storage drawer.
The Precise Clean™
To Self-Clean:
1.Press PRECISE CLEAN cycle. “PRECISE CLEAN REMOVE RACKS SET CLEAN TIME OR PUSH START” will scroll in the display.
2.Press START.
The oven door will automatically lock. “LOCKING” and the stop time will appear in the display. The remaining clean time will also be displayed.
3.When the
4.When the oven is completely cooled, remove ash with a damp cloth.
SteamClean(onsomemodels)
The Steam Clean feature is designed for light oven cavity bottom cleaning.
Allow the range to cool to room temperature before using the Steam Clean feature. If your oven cavity is above 200°F (93°C), “OVEN COOLING” will appear in the display and the Steam Clean feature will not activate until it cools down.
Helpful Hints
■Once the Steam Clean cycle is complete, remove all remaining water in the bottom of the oven with a sponge or cloth.
■Wipe any remaining moisture from the oven door interior, oven cavity interior sides, and cooktop.
■Remove all racks and accessories from the oven cavity.
■For best results, use 10 oz (295 mL) of distilled or filtered water.
■The Steam Clean feature will take a total of 20 minutes. A beep will sound at the end of the cycle.
IMPORTANT: Since the water in the oven bottom is hot, do not open the oven door during the Steam Clean cycle.
Press CANCEL/OFF at any time to end the cycle. The display will return to the time of day.
■Use a soft brush or nylon scrubber to wipe the oven interior. This may help with more stubborn stains.
■It is recommended to use distilled or filtered water, as tap water may leave mineral deposits on the oven bottom. Use a cloth soaked with vinegar or lemon juice to remove any mineral deposits that may be left after the Steam Clean cycle.
■If the oven is heavily soiled, use the
11