NOTE: When using the dispenser with the faucet rotated, do not use the water dispenser pad. Only use the water dispenser button to dispense. Dispensing by pressing the container against the water dispenser pad may result in unintentional spilling.

The tray can be pulled out a bit in order to better support large containers. It is designed to catch small spills and allow for easy cleaning. There is no drain in the tray.

NOTE: The tray can be removed from the dispenser and carried to the sink to be emptied or cleaned. Pull the tray out until it hits the stop, then gently lift up on the back of the tray and slide it out the rest of the way.

The Ice Dispenser

Ice dispenses from the ice maker storage bin in the freezer when the dispenser pad is pressed. The dispensing system will not operate when the refrigerator door is open. To turn off the ice maker, see “Ice Maker and Storage Bin.”

Your ice maker can produce crushed and cubed ice. Before dispensing ice, press ICE on the display screen to select which type of ice you would like to dispense.

The display screen indicates which type of ice is selected.

CRUSHED CUBED

For crushed ice, cubes are crushed before being dispensed. This may cause a slight delay when dispensing crushed ice. Noise from the ice crusher is normal, and pieces of ice may vary in size. When changing from crushed to cubed, a few ounces of crushed ice will be dispensed along with the first cubes.

To Dispense Ice:

1.Select the desired type of ice.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

2.Press a sturdy glass against the ice dispenser pad OR place the glass below the ice dispenser and press the ice dispenser button.

Hold the glass close to the dispenser opening so ice does not fall outside of the glass.

IMPORTANT: You do not need to apply a lot of pressure to the pad or button in order to activate the ice dispenser. Pressing hard will not make the ice dispense faster or in greater quantities.

3.Remove the glass OR release the button to stop dispensing.

NOTE: Ice may continue to dispense for up to 10 seconds after removing the glass from the pad or releasing the button. The dispenser may continue to make noise for a few seconds after dispensing.

The Dispenser Light

When you use the dispenser, the light will automatically turn on. If you want the light to be on continuously, press LIGHT on the display screen to toggle between the ON and OFF settings. The display screen indicates which mode is selected.

ON: The dispenser light will remain on at a consistent brightness.

OFF: The dispenser light will remain off except when dispensing water or ice.

The dispenser lights are LEDs that cannot be changed. If it appears that your dispenser lights are not working, see “Troubleshooting” for more information.

The Dispenser Lock

The dispenser can be turned off for easy cleaning or to avoid unintentional dispensing by small children and pets.

NOTE: The lock feature does not shut off power to the refrigerator, to the ice maker, or to the dispenser light. It simply deactivates the dispenser controls and levers. To turn off the ice maker, see “Ice Maker and Storage Bin.”

To lock the dispenser, press OPTIONS, then LOCK, then YES. The display screen will confirm when the dispenser is locked.

To unlock the dispenser, press OPTIONS, then LOCK, then YES. The display screen will confirm when the dispenser is unlocked.

Power Outage Indicator (on some models)

The power outage indicator lets you know if the power supply to your refrigerator is cut off for more than 1 hour.

When power is restored, a power outage alert will appear on the display screen. The display shows how long the refrigerator was without power, using exact times if the clock has been set.

When the indicator is on, all other dispenser functions are disabled. To use the dispenser, you must reset the power outage indicator.

Press RESET on the display screen, then press YES to confirm that you want to reset the indicator.

From the Home screen, you can view the power outage history for the refrigerator. Press OPTIONS, then OUTAGE.

Ice Maker and Storage Bin

The ice maker and storage bin are located in the upper left-hand side of the refrigerator compartment.

Turning the Ice Maker On/Off

Your ice maker has an automatic shutoff. When the ice maker is on, sensors will automatically stop ice production when the storage bin is full. The ice maker will remain set to ON, and ice production will resume when the bin is no longer full.

To manually turn off the ice maker, press OPTIONS on the display screen, then ICE MAKER. On the next screen, press ICE MAKER again to toggle between ON and OFF. When the ice maker is set to OFF, it will stop producing ice.

11

Page 11
Image 11
Whirlpool W10245525A, W10226405A installation instructions Ice Maker and Storage Bin, To Dispense Ice

W10245525A, W10226405A specifications

Whirlpool has long been a household name in appliances, revered for its innovative products that combine efficiency with user-friendly features. Among its notable offerings are the Whirlpool W10226405A and W10245525A, two appliance components designed to enhance the performance of Whirlpool washing machines.

The Whirlpool W10226405A is primarily a washing machine door latch, engineered for reliability and optimal safety. One of its standout features is its compatibility with various Whirlpool washer models, making it a versatile choice for repairs. This door latch ensures a secure closure during the washing cycle, preventing any leaks or interruptions. Its durable construction is designed to withstand repeated use, providing peace of mind for homeowners concerned about appliance longevity.

In terms of technology, the W10226405A employs a user-friendly design that simplifies installation. It provides an intuitive fit, allowing users to replace the part without the need for professional assistance, thereby saving time and repair costs. Furthermore, its robust design minimizes the risk of malfunction, ensuring that your washing machine operates seamlessly.

On the other hand, the Whirlpool W10245525A is a washing machine control board, which serves as the brain of the appliance. This component integrates advanced control technology that optimizes the washing process. One of its main features is the ability to manage various wash cycles and settings, catering to different fabric types and laundry needs. The control board also provides feedback and diagnostic capabilities, allowing users to identify and troubleshoot issues with ease.

Another key characteristic of the W10245525A is its energy efficiency. By optimizing the wash cycle based on the load, it helps reduce water and electricity consumption, which is not only good for the environment but also beneficial for utility bills. The control board supports smart technology applications, adding convenience and modern functionality to traditional washing machines.

Both the Whirlpool W10226405A and W10245525A exemplify the brand's commitment to quality and innovation. With durable construction, ease of installation, and efficient performance, these components enhance the overall user experience. Whether you’re looking to replace a malfunctioning part or upgrade your washing machine’s capabilities, these Whirlpool products stand out as reliable, cost-effective solutions for any home.