Accessories, Water Filter, Air Filter

■Ice clogged in the ice storage bin or delivery chute? Remove clogged ice, using a plastic utensil if necessary. Clean chute and bottom of storage bin using a warm moist cloth, and dry both thoroughly. To avoid clogging and maintain a fresh supply of ice, empty the storage bin and clean both the bin and delivery chute every two weeks.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

The water dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Kink in the home water source line? Straighten the water source line.

■New installation? Flush and fill the water system.

■Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.

■Is a reverse osmosis water filtration system connected to your cold water supply? See “Water Supply Requirements.”

Water is leaking from the dispenser

NOTE: One or two drops of water after dispensing is normal.

■Glass not being held under the dispenser long enough? Hold the glass under the dispenser for 2 to 3 seconds after releasing the dispenser lever/pad.

■New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

■Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough (on some models)

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

■New installation? Allow 24 hours after installation for the water supply to cool completely.

■Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

ACCESSORIES

To order replacement filters, call 1-800-442-9991and ask for the part number listed below or contact your authorized Whirlpool dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #4396095

Water Filter:

Order Part #W10291030 (P4RFWB)

Air Filter:

Order Part #W10311524

WATER FILTER CERTIFICATIONS

W10297006B specifications

The Whirlpool W10297006B is a high-quality and efficient appliance designed to meet the demands of modern kitchens. With a focus on performance, convenience, and user-friendly features, this appliance has garnered attention from both homeowners and culinary enthusiasts alike.

One of the standout characteristics of the Whirlpool W10297006B is its innovative technology. This appliance incorporates advanced features aimed at enhancing cooking efficiency and precision. The built-in technology ensures even heating and cooking, giving users the confidence that their meals will be prepared to perfection every time. The appliance boasts a powerful heating element, which significantly reduces cooking time, making it ideal for busy individuals or families.

In addition to its cutting-edge technology, the Whirlpool W10297006B is designed with user convenience in mind. Its intuitive control panel allows for easy navigation between settings, making it accessible for users of all skill levels. Features such as preset cooking modes and customizable temperature settings provide versatility, allowing for a wide range of recipes to be tackled effortlessly.

The appliance also emphasizes energy efficiency, helping users save on utility bills. With a focus on sustainability, the Whirlpool W10297006B is built to minimize energy consumption while delivering exceptional cooking performance. This energy-efficient design is not only beneficial for your wallet but also contributes positively to the environment.

Another notable feature of this appliance is its spacious interior. The thoughtfully designed interior provides ample space for cooking multiple dishes simultaneously. Whether you are preparing a hearty family meal or hosting a gathering, the Whirlpool W10297006B allows for flexibility and ease of use.

Durability is another key characteristic of this appliance. Made with quality materials, the Whirlpool W10297006B is built to withstand the rigors of daily use. Its sleek design not only enhances the aesthetics of any kitchen but also ensures that it remains functional and stylish for years to come.

In summary, the Whirlpool W10297006B combines advanced technology, user-friendly features, energy efficiency, and durability to create an appliance that stands out in the kitchen. Whether you are a novice cook or an experienced chef, this appliance is designed to cater to all your cooking needs with ease and reliability.

Whirlpool W10297006B Accessories, Dispenser water is not cool enough on some models, Water Filter

Models: W10297006B