Whirlpool W10297006B Door Removal, Leveling and Alignment

3
Door Removal, Leveling and Alignment
Gather the required tools and parts and read all instructions before starting installation. Save these instruction s for future reference.
NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the
refrigerator and freezer doors. If door removal is necessary, see the instructions below.
IMPORTANT: Before you begin, turn the refrigerator control OFF. Unplug refrigerator or disconnect power.
TOOLS NEEDED:
Phillips screwdriver, ³⁄₁₆" hex key, ¹⁄₄" hex-head socket wrench, ¹⁄₄" and ⁵⁄₁₆" open-ended wrenches or adjustable wrench, internal star
drive or ³⁄₈" hex-head socket wrench
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
2Water Dispenser
Tubing Connection
A. Face of Fitting
A
1Base Grille
3Wiring Connection
Bottom Hinge
7
D. Wiring Clip
B. Routing Plate
A
C. Electrical Housing
A. P-clamp
F. Wiring Plugs
E. Grommets
5Door Removal
DCBA
4Top Left Hinge
Do Not Remove Screws A
A
A
A
6
Do Not Remove Screws A
Top Right Hinge
Leveling
8
A. Bottom Hinge
B. Leveler Bracket
C. Leveling Foot
Door Alignment
9
A. Alignment Screw
A
A
Lower
Raise
A
A
Raise Lower
A
B
C
FE
Doors must be
open to 90˚